Tuesday, December 7, 2010

Access control system how to reconcile industrial upgrading and energy saving and environmental protection

Recently, the State Council officially released a further strengthening of the State Council regarding the eliminate backward production capacity circular made it clear that the electric power, coal, steel, cement and nonferrous metals, coke, paper, leather, printing and dyeing industries focusing on arranging backward production capacity.

Accelerate the phase-out of backward production capacity, on the one hand, the changes in the economic development and adjustment of economic structures, improve the quality and effectiveness of economic growth initiatives; on the other hand, speeding up the energy-saving emission reduction and positive response to global climate change, it is our honour in Stockholm climate meeting on global emission reduction commitment of States, doing a big responsibility.

Security industry is currently one of the rising sun, in addition to our security defense gave also to GDP and employment provides strong support.

Therefore, the security industry also with times for industrial upgrading, as global energy conservation and emission reduction, environmental protection, low-carbon. Then, as the security industry is an important part — access control and identification, how should take into account industrial upgrading and energy saving and environmental protection?

Currently the most widely used access control system only two: contactless cards and contactless card entrance guard system.

Contactless card requires the cardholder to access control card in contact with the recognizer to read card information; and non-contact card entrance guard system of an access card at the entrance guard recognizer recognizes distance, may carry on the identification and recording of information. The two main access identification system can be said that the recognition of high accuracy high; access control card small size, convenient to carry. But considering that China as a billion people in the populous, if half of the people holding a piece of an access card, number of release access control card already considerable; plus now everyone can't be only a single access control card: company and community of the one, bank cards and access control card bus card and so on, so an access card number is incalculable. Even now have new material PETG card, card waste of resources is difficult to estimate. Therefore, the author's point of view, access control systems to achieve energy-saving emission reduction, environmental protection, low-carbon, we can fully develop biometric access control system and mobile phone-card access control system.

Use the body as a key-biometric access control system

Biometric technology in China already has more than 10 years of development, we present the fingerprint recognition is the most widely used biometric technology.

Biometric technology not only in the security, convenience, ease of management in the great advantages, the most important thing is in line with the trend of energy saving and environmental protection. Fingerprint access control, enabling men to abandon the traditional access control card, you only need the finger touch or within scan at close range, you can identify successful, a significant reduction in the production of an access card. However, the fingerprint door lock is not perfect, for example, finger cannot be the damage, otherwise the recognizer does not properly scan fingerprint; fingerprint access control prices also relatively high, yet a large number of popular, and so on.

However, biometric access control system when if national popularity, in terms of energy saving and environmental protection must have extraordinary contribution.

After all, it really reduces a large number of access control card production, significantly reducing the environmental pollution from waste an access card. In addition, biometric technology to manufacturers of technical research and development strength has certain requirements in the industry not to upgrade, do not accept new things of manufacturers will be eliminated by the market and consumers.

Access + wallet + bus card = cell phone-mobile phone-card access control system

With the Shanghai World Expo has adopted this new mobile phone tickets Tickets for the media, the official high-profile mobile phone card.

RFID-SIM chip appears to give a mobile phone in addition to the traditional communication functions, also implements monetary transactions and access control features. The emergence of mobile phone card for access control + wallet + bus cards enable a true "one cartoon". According to the authors by visiting the community survey found that many community in addition to the use of fingerprint recognition access control, there is a mobile phone as an access card to use; at the same time, many new buildings and also the "mobile access" as a new sales selling points to attract new owners.

Integrate access control + wallet + bus card phone card, in addition to being able to reduce this article focuses on the production referred to in the access control card, bank card and bus cards both card types of products will also be significantly reduced, really reduces the material PVC or PETG card products to the market demand, reduce card products of environmental pollution.

Of course, mobile card is also a disadvantage exists.

If your phone was stolen, have access + wallet + bus card phone card would be a security risk in time bomb, personal safety, and financial security are not guaranteed; at the same time, making up a new mobile phone card may require cumbersome procedures, as well as the "patronage" multiple departments. However, cannot obscure great virtues, mobile phone card really struck industrial upgrading and energy saving and environmental protection.

So-called fish and bear paw is not at the same time, how to reconcile industrial upgrading and the balance between the energy saving and environmental protection, not only need the relevant government departments of the correct boot, you need the majority of manufacturers and consumers to meet their needs.

We are in the process of upgrading, never forget the energy-saving environmental protection, or is "lost" watermelon pick sesame.

No comments:

Post a Comment